Forums

Check out photos, videos, feedback, and success stories direct from our customers.

Get Answers to all of your General Questions about Rust Prevention, Clear Coats, Tank Sealers and so much more.

Ask and answer questions about KBS Klean — a professional-strength, concentrated cleaner degreaser designed for thorough surface preparation before painting or coating. KBS Klean's water-based, biodegradable formula is a safe and effective alternative to flammable solvents and hazardous chemicals. It deeply penetrates and lifts stubborn grease, oil, dirt, and contaminants from metal, concrete, and most other surfaces — leaving no harmful residues or noxious fumes behind. Proper surface prep with KBS Klean ensures maximum adhesion and a longer-lasting finish for any KBS coating system.

🛒Shop KBS Klean

Ask and Answer Questions about RustBlast. RustBlast is a powerful rust remover, zinc phosphate pre-primer, and metal etch. RustBlast effectively dissolves rust, corrosion, metal oxides, and tarnishing from most metal surfaces. Ideal for removing rust from chrome surfaces.

🛒Shop RustBlast

Ask and Answer Questions about RustSeal. RustSeal is a superior one part, ready-to-use, high-solids content, rust preventive coating, that is actually hardened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel.

Ask and Answer Questions about Tank Sealer. Gold Standard Fuel Tank Sealer is a superior, one part, ready-to-use fuel tank sealer that is specifically formulated to stop rust and corrosion. Used on steel tanks, fiberglass tanks, motorcycle tanks, diesel tanks and so much more.

Ask and Answer Questions about Tank Sealer Kits. Tank Sealer Kits include the prep and a superior, one part, ready-to-use fuel tank sealer that is specifically formulated to stop rust and corrosion. Used on steel tanks, fiberglass tanks, motorcycle tanks, diesel tanks and so much more.

Ask and Answer Questions about DiamondFinish Clear. DiamondFinish Clear is a permanent, high solids, moisture cured single component Clear Coat. DiamondFinish Clear is the latest development in ultra high performance clear coats with very high solids (over 60%) and low VOCs.

Ask and Answer Questions about XTC. XTC (Xtreme Temperature Coating) is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500° F to 1500° F.

Ask and Answer Questions about Motor Coater. Motor Coater is easy to apply, offers superb coverage and yields a self-leveling professional looking finish brushed or sprayed. These engine enamels provide deep, rich pigmented colors for excellent coverage. Your engine will be a show stopper at this DIY price!

Ask and Answer Questions about BlackTop. BlackTop is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal or any other paint/primer application. BlackTop is the #1 rated frame paint on the market today.

KBS MAXX is a superior performance, two-component, low VOC, low HAPs polyurethane topcoat specifically designed for the automotive, agricultural, fleet refinishing, marine, and heavy industrial equipment markets.

KBS MAXX Clear is a durable two-component (2K), low VOC, permanently UV stable moisture cured polyurethane clear coat that can easily be applied by brush, roller, or sprayer to provide durability and rust protection. KBS MAXX Clear is specifically formulated for indoor and outdoor applications including automotive, agricultural, fleet refinishing, marine, and heavy industrial equipment.

Ask and Answer Questions about KBS Strip. KBS Strip is a heavy-duty paint remover and tank stripper. KBS Strip has been developed for use on wood, metal and masonry surfaces. This penetrating semi-gel formula clings to vertical surfaces like magic and removes even your toughest finishes fast and easy!

Ask and Answer Questions about Cavity Coater. Cavity Coater is a one-step, super-penetrating corrosion inhibiting coating (CIC) for long term protection on all metal surfaces. Cavity Coater provides a self healing film which renders over 4000+ hrs salt spray protection...over 4 times the protection of conventional cavity waxes.

Ask and Answer Questions about KBS UnderCoat. KBS UnderCoat is a superior undercoating that provides protection in wheel wells, gas tanks, frames, and floor pans. KBS UnderCoat produces a very tough, yet flexible film with excellent adhesion, and helps prevent road salt from eating away at your car's metal and fiberglass.

KBS Top Coater 1K Aerosol is an aerosol spray paint formulated for maximum coverage and professional looking results. KBS Top Coater 1K Aerosol is an ideal topcoat paint for RustSeal when the area will be consistently exposed to sunlight. KBS Top Coater 1K Aerosol is an extremely high solids paint does not run or sag, and gives at least twice the coverage of conventional spray paints.

KBS Top Coater is a superior spray paint formulated for maximum coverage and professional looking results. KBS Top Coater is an ideal top coat paint for RustSeal when the area will be consistently exposed to sunlight. KBS Top Coater is a very high solids paint does not run or sag, and gives at least twice the coverage of conventional spray paints.

Fusion Self-Etch Primer is an all-purpose self-etching-primer ideal for promoting adhesion between multiple surface coatings (including applications of topcoats or primers over cured RustSeal) in addition to priming bare metals such as steel, brass, aluminum, and most hard plastics.

Ask and Answer Questions about NuMetal Epoxy Putty. NuMetal Epoxy Putty is an easy-to-use, two-part putty that mixes like clay but hardens like steel! NuMetal bonds, seals, fills, insulates, anchors, caulks and waterproofs. It cures without shrinking or sagging and can be drilled, tapped, sanded, primed and painted. NuMetal will not only stick to damp surfaces, but it will cure underwater!

KBS Patch is an easy-to-use, UV/sunlight activated repair patch. The fiberglass-reinforced polyester patch creates long-lasting repairs. Perfect for making watertight, durable repairs on engine parts, decking, fenders, gas cans, drain pipes, water tanks, PVC pipes, plastics, Plexiglas, fiberglass, metal, wood, concrete and more.

This Rotor Restoration Kit includes everything needed to clean, prep, prime and coat those rusted eyesores and bring them back to a showroom appearance.

KBS Bed Renu is a tough & flexible thick black protective coating designed to touch up areas where your bedliner has worn away or needs “Renu’d”. KBS Bed Renu protects against corrosion & abrasion while withstanding impacts & improving traction. KBS Bed Renu features fast cure & excellent adhesion also extending the life of your vehicle.

KBS Rust Converter easily converts a rusty surface in to a black, inert primed surface that is ready for paint and compatible with most topcoats and also protects against future rust.

KBS Bed Liner is a tough and flexible thick black protective coating designed to protect against corrosion and abrasion while withstanding impacts and improving traction. KBS Bed Liner features excellent adhesion and extends the life of your vehicle.