KBS Patch
KBS Patch is an easy-to-use, UV/sunlight activated repair patch. The fiberglass-reinforced polyester patch creates long-lasting repairs. Perfect for making watertight, durable repairs on engine parts, decking, fenders, gas cans, drain pipes, water tanks, PVC pipes, plastics, Plexiglas, fiberglass, metal, wood, concrete and more.
11 topics in this forum
-
The corner of my front fender just behind the wheel is rusted/rotting (starting to crumble away). If i cut away the rusted/rotted section (about 3 inches or so) Can i use the patch to replace the part i cut away by adhering it to the part of the fender that is still good and essentially rebuilding that corner with just the patch? Essentially an approximate 3x3inch area would be just patch and the rest of the patch would be adhered to the fender. I'd plan to rustseal over that then prime and topcoat it. Is it strong enough to do that? Also, can you double up the patch? Will it adhere to itself? Sticky side to sticky side. Will that hold up over time? Any better ideas? Than…
-
- 0 replies
- 555 views
-
-
My pool has a small crack in the concrete. Do you have anything that could seal this up and prevent it from leaking?
-
- 1 reply
- 9.1k views
- 1 follower
-
-
I want to paint my frame with Rust Seal but I have some holes that are about 3"x 3". Can I prep the surface and then put the KBS Patch over these holes in the frame? Is the KBS Patch designed to do this?
-
- 1 reply
- 2.6k views
- 1 follower
-
-
I have a hole in metal water tank about 4 inches long and 3 inches wide. Will this patch work to seal this up? Can I paint over the patch?
-
- 1 reply
- 3.1k views
- 1 follower
-
-
Is the KBS Patch resistant to gas?
-
- 1 reply
- 2.7k views
- 1 follower
-
-
I have a hole in the floorboard of my car about 5'' x 5". Will the KBS Patch fix this?
-
- 1 reply
- 2.9k views
- 1 follower
-
-
Will your KBS Patch adhere to plastic?
-
- 1 reply
- 2.9k views
- 1 follower
-
-
I have an aluminum water tank for my cows that is leaking. Will the KBS Patch seal this?
-
- 3 replies
- 3k views
- 1 follower
-
-
Will your KBS Patch adhere to plastic?
-
- 1 reply
- 2.8k views
- 1 follower
-
-
I noticed you have a new product called the KBS Patch. I have a crack in my gas tank that I'm going to seal. Would you recommend this for the outside of the tank? What are the steps to applying this?
-
- 1 reply
- 2.6k views
- 1 follower
-
-
What wavelength UV is required for curing of KBS Patch? Would a high power UV leak detection dye light work?
-
- 1 reply
- 2.7k views
- 1 follower
-
