althezenman Posted March 15, 2016 Report Posted March 15, 2016 I ordered some products to paint my motorcycle frame. The frame is in good shape overall with only a few very small rust spots. I am concerned about adhesion on such a clean surface.I know the RustBlast etches the metal but I confused whether the etching properties only work on rusted metal and not clean metal. So far, I have striped the factory paint and sanded with 150 grit. Should I go ahead with the KBS system from here OR could I sand up to 220/320 grit? Quote
KBS Coatings Posted March 15, 2016 Report Posted March 15, 2016 RustBlast etches rusted metal and clean metal surfaces extremely well. The smoother the surface, the more etching the surface needs. And while the surface does not need the 320 grit scuff, giving the surface a 320 grit scuff would not hurt anything and could only help adhesion. Please review the complete RustSeal Directions and let us know if you have any additional questions. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.