Spray DiamondFinish Clear

[dkelly]

Can I thin DiamondFinish Clear to spray it?

[KBS Coatings]

Yes, we recommend thinning DiamondFinish Clear if you are spraying with a conventional gun or an HVLP gun.

For spraying, 10%-15% thinning is normally adequate. DiamondFinish Clear can be thinned up to 30%. Use KBS #1 Thinner ONLY.

When spraying: Spray pressure of 35-45 psi(250-330 kpa) for siphon/pot guns and 25-35psi (170-250 kpa) for gravity/top container guns. As a general rule of thumb, we recommend a 1.4-1.5 nozzle.

Please review the DiamondFinish Clear Directions and let us know if you have any additional questions.