Jump to content
Ordering & InfoSupport ForumContact UsReseller FinderFree Catalog
Guest

Motor Coater Over RustSeal as Top Coat

Recommended Posts

Yes, you can absolutely top coat RustSeal with Motor Coater.

There are three effective ways to topcoat RustSeal effectively so that the coatings bond & fuse together.

1) Apply Motor Coater once the second or final coat of RustSeal is dry-to-the-touch and does not leave a fingerprint (usually 3-10 hours depending on temperature and humidity).

2) Let the second or final coat of RustSeal fully cure (at least 24 hours), scuff the RustSeal with 300 grit, then apply Motor Coater.

3) Let the second or final coat of RustSeal fully cure (at least 24 hours), dust the RustSeal with Fusion Self-Etching Primer, let the Fusion cure for 30 minutes, then apply your top coat.

You can feel free to choose the method that will work for you.

Please let us know if that helps and if you have any additional questions.

Share this post


Link to post
Share on other sites

Can I paint my entire tractor with motor coater? The tractor and the engine are one in the same. This is a before picture. The engine, transmission and rear unit have all been gone through and it is in the process of being put back together. I guess the real question is, does the engine coater have UV protection?

DSC02277.JPG

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...