Jump to content
Ordering & InfoSupport ForumContact UsReseller FinderFree Catalog
platboy

Rust Blast Query

Recommended Posts

Hi I just used Rust blast for the firest time in some freshly sandblasted car patch panels. I followed the instructions to the letter, with the exception of Aquaclean as it says it isn't required on freshly blasted metal. Now I have some areas that have the white residue, some areas that look as they did before (although a darker shade of grey) and some areas of brown which I am guessing is flash rust. It does in fact look exactly like the ***-** example on the website comparison. Is it better to agitate the rustbast with a bristle brush or similar (I just painted it on with a paint brush). I am not comfortable simply painting the Rust seal over this flash rust, as it is worse than when I started. Any ideas? Cheers, James.


Share this post


Link to post
Share on other sites

James, as the directions state, neither KBS Klean nor RustBlast is needed after sandblasting. The sandblasting manages to clean and abrade the surface for excellent RustSeal adhesion. You can reapply the RustBlast now keeping it wet for 15 minutes or longer as desired, and you can use something such as a scotch-brite pad to scour the surface. Immediately rinse with water, and immediately dry the surface with a clean dry cloth and/or compressed air. Drying the surface off helps to keep the moisture from just sitting on the substrate and the beginning of flash rust. Then let the surface air dry very well before painting.

 

Share this post


Link to post
Share on other sites

I did the cleaning process and dried the tank with a Shop-Vac it looked very clean then I did the rust blast and air-dried it with a Shop-Vac and now I have more rest than ever, flash rust everywhere. Doe I proceed to step 3 sealer or ?

Share this post


Link to post
Share on other sites

RustBlast leaves behind a light zinc phosphate coating (dust) which is white in color. If it is humid, the surface can product some flash rust. That flash rust (which is light brown) mixes with the zinc phosphate (which is white) and produces what looks like a lot of flash rust when it is in reality a small amount of flash rust mixed with the zinc phosphate which aids in the adhesion of the Tank Sealer.

As long as you did indeed rinse the RustBlast with water and the surface is now 100% bone dry, you are set to proceed to the Tank Sealer Step.

Please let us know if that helps and if you have any additional questions.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...