Search the Community

"Using KBS Klean, RustBlast & RustSeal and BlackTop made this trailer restoration job much easier and virtually less time consuming verses the traditional practice of grinding rust, priming and spray painting. As reflected in the pictures, KBS will exceed your expectations." -Randy P.

This entire engine compartment was coated with KBS Coatings. RustSeal and BlackTop on the firewall and frame components. Motor Coater was used on the engine. Professional Results at a DIY Price.

Chevy Orange Motor Coater on Engine. XTC Cast Iron Grey on Headers XTC Stainless Steel on Exhaust RustSeal Gloss Black on Underside RustSeal Galv Steel on Drive Shaft RustSeal & BlackTop on Firewall, A-Arms & Frame under Engine

BlackTop is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal or any other paint/primer application. BlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure.

“Leaky windshield removed to reveal rusty channel. Cleaned with wire brush and then followed directions as described. Channel looks great and ready for glass!” -Jason A. Be sure to check out the System Sampler and BlackTop.

"I wire wheeled the entire tub, used the three stage Chassis kit Chassis Paint Kit - KBS All-In-One Chassis Kit - KBS Coatings - prewash, metal prep, then applied paint with a brush/roller,.. I painted the chassis, tub (inside & out), fenders, hood, bumpers and windshield frame.. The main thing with this type of paint is to do ALL of the prep work, however painstaking it may be, and READ the instructions twice before starting. (That advice is for any of the rust preventive sealer paints.)" -JavaTree on Jeepforum.com

“Here are some before & after photos of my Dodge 2500 frame and bed I did using KBS Klean and RustBlast for prep. Then using RustSeal & BlackTop top coat satin to protect my investment. Thanks KBS Coatings!” -Mitchell Z KBS Klean RustBlast RustSeal BlackTop

I am planning on painting my frame in the spring. I am wanting a nice glossy finish. I was wondering what would be the best way to go about this? I was looking at the Blacktop with the DiamondFinish clear. Can it be Sprayed out of a HVLP gravity fed paint gun?

Hey there, I just had some wheels powdercoated and noticed a number of spots where the powder is thin and not covering appropriately and I was just curious if I can black top on top of a cleaned powdercoated black and clear wheel and if it will adhere with no problems? I plan to follow the black top up with the clear topcoat KBS sells. Let me know if this is feasable. Thanks!

“Painted control arms, springs, and entire frame, I didn't even scratch the paint off installing the coil springs which never happens.” -The Goat, Phillipsburg,KS The All-In-One Chassis Kit

I'm looking for a very low sheen finish but don't know whether to buy the satin or flat product? Is the flat truly flat or has a very low sheen? What about the satin? How can I tell without purchasing and taking a chance? Also, can I apply this paint directly onto aluminum or fiberglass? Thanks!