Jump to content
Ordering & InfoSupport ForumContact UsReseller FinderFree Catalog


  • Content Count

  • Joined

  • Last visited

  1. I have the rust seal down, I followed that with the Fusion SEP and now for added adhesion/protection I wanted to lay an epoxy primer before I top coat with an acrylic enamel. Can I lay an epoxy primer over the Fusion and is there a particular epoxy you would recommend?
  2. Well not enough thinning I would say. Now that I have the Fusion SEP I am going to spray it and perhaps follow up with a filler where needed. I already gave the rust seal a light sanding.
  3. Yep. I actually had to start using 320 grit, because like you said the 400 was taking too long. I noticed as I am sanding the rust seal smooth, there are "freckles" here and there. The freckles are small shallow dimples in the paint, perhaps from my inexperience in spraying. You can see them because they are concave and they remain black while the sanded areas turn grey. Does the fusion self etch primer, my next coat to lay down, act like a filler as well to hide these small imperfections or should I spray another coat of rustseal first? Thanks
  4. Stayed up till 3am (waited for kids to be in bed) to spray for my first time ever. I sprayed a cab with 2 coats of rust seal and noticed some runs and dust in the finish this morning. I know rust seal is not a finish coat, but I want to eliminate the flaws before I spray a top. 1.How long should I wait before I sand out the imperfections? 2.Would 400 grit work well enough? 3.After sanding the rustseal smooth, do I have to reapply another coat of rust seal or can I just continue with the top coat. Thanks
  • Create New...